Option for sensors: TEDS inside the plug

TesT is able to deliver all electrical force transducers, load cells and torque transducers with TEDS modules (TEDS = Transducer Electronic Data Sheet according to IEEE 1451.4).

Our Evaluation Electronics of model series 813 may recognize sensors that are equipped with TEDS chips, read their properties and calibration data, and automatically calibrate with them. Thus, this evaluation electronics can operate with dozens of different sensors, so that a complex recalibration is not required.

Please note! The TEDS module is already integrated (ex works) inside the devices of model series 301, 307, 314, 411 and 415 and thus included in standard scope of delivery. The option "TEDS inside the plug" is therefore NOT combinable with these model series.

For all other sensors* you now have the opportunity to benefit from this advantage of stored calibration data by adding this option "TEDS inside the plug". Please choose top right if the TEDS module shall be integrated inside a 7-pole Binder connector or inside a 12-pole Binder connector (with bayonet lock), and then please add this TEDS option to your shopping cart. (For operating your sensor in combination with an Evaluation Electronics 813 you will need the 12-pole Binder connector.)

*All other sensors are: Model series 302, 303, 304, 305, 308, 311, 332, 340, 341, 342, 343, 344, 347, 601, 602, 610, 611, 612, 630, 640, 649

Delivery time (handling time):

The delivery time of the Option: TEDS inside the plug complies with the delivery time of the main product >> please see sensor.
____________________________________________________________________________________________________________________________

Comment 1: If you add this Option: TEDS inside the plug >> possible sense leads inside your sensor will not be wired to the plug.

Comment 2: The Option: TEDS inside the plug can of course only be purchased in combination with a TesT sensor and not in combination with another product, not as an individual article and not in combination with an above stated sensor model that has the TEDS module already integrated in standard version.

Subject to technical changes. Illustrations are approximate.